1.
Isaac M. Daniel and Ori Ishai, Engineering Mechanics of
Composite Materials, Oxford University Press, New York,
Second Ed., 2005.
2.
I. M. Daniel, E. E. Gdoutos, K. A. Wang, and J. L. Abot,
"Failure Modes of Composite Sandwich Beams,"
Int. J. Damage Mechanics, Vol. 11, 2002, pp. 309-334.
3.
M.-K. Um, I. M. Daniel and B.-S. Hwang, "A Study of
Cure Kinetics by the Use of Dynamic Differential Scanning
Calorimetry," Composites Science and Technology, Vol.
62, 2002, pp. 29-40.
4.
J. L. Abot, A. Yasmin, I. M. Daniel, "Mechanical and
Thermoviscoelastic Behavior of Clay/Epoxy Nanocomposites,"
Materials Research Society Symposium - Proceedings, Vol.
740, 2002, pp. 167-172.
5.
S. K. Kim, I. M. Daniel, and J. G. Opperer, "Determination
of Permeability of Fibrous Medium Considering Inertial Effects,"
International Communications in Heat and Mass Transfer,
Vol. 29, No. 7, 2002, pp. 879-885.
6.
I. M. Daniel, E. E. Gdoutos and K.-A. Wang, "Failure
of Composite Sandwich Beams," Advanced Comp. Letters,
Vol. 11, No. 2, 2002, pp. 49-57.
7.
E. E. Gdoutos, I. M. Daniel, and K.-A. Wang, "Indentation
Failure in Composite Sandwich Structures," Exper.
Mech., Vol. 42, No. 4, 2002, pp. 426-431.
8.
E. E. Gdoutos, I. M. Daniel, K.-A. Wang, and J. L. Abot,
"Compression Facing Wrinkling of Composite Sandwich
Structures," Mech. of Materials, Vol. 35, 2003, pp.
511-522.
9.
S. K. Kim and I. M. Daniel, "Determination of Three-Dimensional
Permeability of Fiber Preforms by the Inverse Parameter
Estimation Technique," Composites Part A, Vol. 34,
2003, pp. 421-429.
10.
S. K. Kim, J. G. Opperer, I. M. Daniel, "Detection
of Local Preform Defects by Gas Flow Method and Statistical
Analysis," Advanced Composites Letters, Vol. 12, No.
3, 2003, pp. 85-90.
11.
S. K. Kim, D. H. Kim, J. G. Opperer, and I. M. Daniel, "Determination
of In-Plane Permeability of Fiber Preforms by the Gas Flow
Method Using Pressure Measurements," Polymer Composites,
Vol. 24, No. 1, 2003, pp. 34-44.
12..
I. M. Daniel, H. Miyagawa, E. E. Gdoutos, and J. J. Luo,
"Processing and Characterization of Epoxy/Clay Nanocomposites,"
Experimental Mechanics, Vol. 43, No. 3, 2003, pp. 348-354.
13.
A. Yasmin, J. L. Abot, I. M. Daniel, "Processing of
Clay/Epoxy Nanocomposites by Shear Mixing" Scripta
Materialia, Vol. 49, No. 1, 2003, pp. 81-86..
14..
J. J. Luo, I. M. Daniel, "Characterization and Modeling
of Mechanical Behavior of Polymer/Clay Nanocomposites,"
Composites Science and Technology, Vol. 63, 2003, pp. 1607-1616,.
15.
Z. Sun, I. M. Daniel, and J.-J. Luo, "Statistical
Damage Analysis of Transverse Cracking in High Temperature
Composite Laminates," Materials Scie. and Eng., Vol.
A341, 2003, pp. 49-56.
16.
Zuo Sun, I. M. Daniel, and J. J. Luo, "Modeling of
Fatigue Damage in a Polymer Matrix Composite," Materials
Science and Engineering, Vol A 361, 2003, pp. 302-311.
17.
Sun K. Kim and Isaac M. Daniel, "Gas Flow Test of
Braided Preform Quality for Resin Transfer Moulding,"
Advanced Composites Letters, Vol. 12, No. 4, 2003., pp.
161-163.
18.
S. K. Kim, D. H. Kim, and I. M. Daniel, "Optimal Control
of Accelerator Concentration for Resin Transfer Molding
Process," International Journal of Heat and Mass Transfer,
Vol. 46, 2003, pp. 3747-3754.
19.
I. M. Daniel, E. E. Gdoutos, J. L. Abot, and K. A. Wang,
"Deformation and Failure of Composite Sandwich Structures,"
Journal of Thermoplastic Composite Materials, Vol. 16, 2003,
pp. 345-364.
20.
S. K. Kim, J. G. Opperer, and I. M. Daniel "Gas Flow
Method for Detecting Local Preform Defects by Inverse Estimation
of Space Varying Permeability," Journal of Composite
Materials, Vol. 37, No. 15, 2003, pp. 1367-1383.
21.
Z. Sun, I. M. Daniel, and J. J. Luo, "A Novel Statistical
Model for Predicting Matrix Cracking in High Temperature
Composite Laminates," Journal of Materials Science,
Vol. 38, 2003, pp. 3029-3035.
22.
J. L. Abot, A. Yasmin, A. J. Jacobsen, "In-Plane Mechanical,
Thermal and Viscoelastic Properties of a Satin Fabric Carbon/Epoxy,"
Composites Science and Technology, Vol. 64, Issue 2, 2004,
pp. 263-268.
23.
Zdenek P. Bažant, Yong Zhou, Drahomir Novak, and I.
M. Daniel, "Size Effect on Flexural Strength of Fiber-Composite
Laminates," Journal of Engineering Materials and Technology,
Vol. 126, 2004, pp. 29-37.
24.
J. L. Abot and I. M. Daniel, "Through-thickness Mechanical
Characterization of Woven Fabric Composites," Journal
of Composite Materials, Vol. 38, No. 7, 2004, pp. 543-554.
25.
A. J. Jacobsen, J. J. Luo, and I. M. Daniel, "Characterization
of Constitutive Behavior of Satin-weave Fabric Composite,"
Journal of Composite Materials, Vol. 38, No. 7, 2004, pp.
555-566.
26.
Jeremy G. Opperer, Sun K. Kim, and Isaac. M. Daniel, "Characterization
of Local Preform Defects in Resin Transfer Molding by the
Gas Flow Method and Statistical Analysis," Composites
Science and Technology, Vol. 64, 2004, pp.1921-1935.
27.
Shiguo Rao, Isaac M. Daniel, and Emmanuel E. Gdoutos, "Mechanical
Properties and Failure Behavior of Cord/Rubber Composites,"
Applied Composite Materials, Vol. 11, 2004, pp. 353-375.
28.
Asma Yasmin and Isaac M. Daniel, "Mechanical and Thermal
Properties of Grapite Platelet/Epoxy Composites,"
Polymer, Vol. 45, 2004, pp. 8211-8219.
29
P. M. Schubel, E. E. Gdoutos, and I. M. Daniel, "Fatigue
Characterization of Tire Rubber," Theoretical and
Applied Fracture Mechanics , Vol. 42, 2004, pp. 149-154.
30.
Jyi-Jiin Luo and Isaac M. Daniel, "Sublaminate-Based
Lamination Theory And Symmetry Properties of Textile Composite
Laminates," Composites Part B: Engineering, Vol. 35,
No. 6-8, 2004, pp. 483-496.
31.
Isaac M. Daniel, Jandro L. Abot, Jyi-Jiin Luo and Patrick
M. Schubel, "Three-Dimensional Characterization of
Constitutive Behavior and Failure of Textile Composites,"
Proc. of 11th International Conference on Fracture, Torino,
2005.
32.
Patrick M. Schubel, Jyi-Jiin Luo, and Isaac M. Daniel, "Low
Velocity Impact Behavior of Composite Sandwich Panels,"
Composites Part A: Applied Science and Manufacturing, Vol.
36A, No. 10, 2005, pp. 1389-1396.
33.
Sun K. Kim and Isaac M. Daniel, "Transient Gas Flow
Technique for Inspection of Fiber Preforms in Resin Transfer
Molding," Composites Part A: Applied Science and Manufacturing,
Vol. 36, 2005, pp. 1694-1699.
34.
J. L. Abot, A. Yasmin, and I. M. Daniel, "Hygroscopic
Behavior of Woven Fabric Carbon-Epoxy Composites,"
Journal of Reinforced Plastics and Composites, Vol. 24,
No. 2, 2005, pp. 195-207.
35.
H. Miyagawa, K. H. Foo, I. M. Daniel, and L. T. Drzal, "Mechanical
Properties and Failure Surface Morphology of Amine-Cured
Epoxy/Clay Nanocomposites," Journal of Applied Polymer
Science, Vol. 96, No. 2, 2005, pp. 281-287.
36.
J. M. Bayldon, Z. P. Bazant, I. M. Daniel, and Q. Yu, "Size
Effect on Compressive Strength of Sandwich Panels Failing
by Fracture of Woven Laminate," ASME Journal of Engineering
Materials and Technology, Vol. 128, No. 2, 2006, pp. 169-174.
37.
Asma Yasmin, Jyi-Jiin Luo, and Isaac M. Daniel, "Processing
of Expanded Graphite Reinforced Polymer Nanocomposites,"
Composites Science and Technology, Vol. 66, 2006, pp. 1182-1189.
38.
A. Yasmin, J. J. Luo, J. L. Abot, and I. M. Daniel, "Mechanical
and Thermal Behavior of Clay/Epoxy Nanocomposites,"
Composites Science and Technology, Vol. 66, 2006, pp. 2415-2422.
39.
Zdenek P. Bazant, Young Zhou, Ferhun C. Caner, Isaac M.
Daniel, and Qiang Yu, "Size Effect on Strength of Laminate-Foam
Sandwich Plates," Journal of engineering Materials
and technology, Vol. 28 (No. 3), 2006, pp. 366-374.
